 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
So I just installed a K-304-k into a house. The house has been vacant for about 15 months now, so no one has been using the water. I came in and replaced the valve, and closed up the wall. I installed all the fixtures, and sure enough, no hot water. It comes out in a slow trickle. Here are...
Have a house on a well system. House is 24 years old, and over past year have noticed a continual decrease in cold water pressure. Hot water is fine. Well system maintains roughly a 42- 46 psi. The house has 40 psi at main line. House had flexible plastic water lines throughout, When flow...
I have a single faucet sink where the cold water pressure is fine and all other sinks have good hot and cold water pressure. I replaced the kitchen faucet two years ago along with new lines. As of late I'm getting very little hot water pressure along with having to run the water for about 10...
I have already cleaned the Megaflo cold water valve unit. The Megaflo Heatrae Sadia is only 3/5 years old. What should I do?
We have very low water pressure at our kitchen sink from both the cold and hot water faucets, but no problem with the water pressure to the bathroom or washer. The cold water tank is closest to the kitchen and the hot water heater is near the bathroom and washer. Someone told my roommate that there...
View more questions Search
|
