 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2006 Honda Odyssey 3.5l
My Honda Odyssey w/ 140K, just quit running driving down the block. The engine code P0108 was detected and the MAP sensor replaced. Code is gone but engine still will not turn over. If the car sits overnight it start for 2-3 seconds, running very rough, then quit. What Should I check?
Additional data: All engine lights are functioning properly Timing chain replaced at 115K, still in tact I can hear fuel pump engage Fuel pump relay was replaced |
||||
|
||||
|
Ensure MAP Sensor connector and electrical harness are good. It's common for problems with these items, rather than the MAP Sensor. Honda MAP Sensors tend to be very reliable. If the problem persists, connect an advanced scan tool to the data link connector, rather than a code reader.
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Honda odyssey 2004
[ 2 Answers ]
The following is happening intermittantly ; when I try to start the car and see the green key light (immobilizer) it will start but sometimes the key light doesn't appear and car won't start . Also will stop dead while I'm driving in traffic . If something is deffective why would this only happen...
Honda Odyssey
[ 4 Answers ]
I have a 2000 Honda Odyssey van. I changed the head gaskets and now I'm getting a P108 and P0336 code. What would cause this.
2000 honda odyssey
[ 8 Answers ]
I would like to change ATF, what kind of and how many quart it needed?:mad:
View more questions Search
|
