 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
L120; Engine dies when brake is released?
JD L120 automatic; Engine starts and runs great, until the brake is released(foot-pedad). Then the engine dies. Is there a sensor that is shorting the ignition. It is
Impossible to see past the housing where the brake rod goes through. |
||||
Check out some similar questions!
When brake is released motor dies.
Dies when brake/clutch is released AND when the mower deck switch is pulled on (in this case even when the brake/clutch is latched). It dies as though I've turned the switch off. No chugging or overloading so I suspect electrical problem, likely the brake/cltch switch?? When the brake/clutch pedal...
I have a craftsman riding mower model 917.273380 that dies when the brake is released or even if I try to engage the blades. I have replaced all the safety switches and it still does the same any idea of what's causing the problem?
I have a 42" 17hp twin IC automatic MTD Yard Machine bought in 2000 that has me scratching my head. I was cutting the lawn when I hit a high spot ( small mound of dirt ) and the blades caught it. The mover bogged down and died before I could disengage the PTO lever. I disengage the lever, restarted...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
