Ask Experts Questions for FREE Help !
Ask
    nichonb's Avatar
    nichonb Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 22, 2012, 09:47 AM
    Sears Craftsman riding mower.
    The engine cuts off after making several rounds of cut in the yard. It is like when it gets hot, it just shuts off an won't crank. I wait several hours, then it will start back up and then do the same thing. Have changed all the filters, spark plugs, etc... any ideas?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Aug 2, 2012, 02:30 PM
    Hi,
    Usually the "won't start until it cools" description applies to a bad ignition.
    Peace,
    Clarke
    ghower's Avatar
    ghower Posts: 18, Reputation: 1
    Last Million Dollar Man Craftsman
     
    #3

    Sep 20, 2014, 08:31 PM
    Check gas cap make sure it can breath. Also check oil. Older carbs needle valves wear out gets gas in oil.
    ghower's Avatar
    ghower Posts: 18, Reputation: 1
    Last Million Dollar Man Craftsman
     
    #4

    Sep 20, 2014, 08:49 PM
    Once had one with bad carb solenoid wireing. Somehow once got hot solenoid shut tractor down. Did everything so we cut the needle off solenoid and put shut off valve on fuel line. We changed everything. But this finally worked

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Sears Craftsman riding mower will not start [ 9 Answers ]

Sears Craftsman riding mower will not start. Not a click sound. Battery is good. I think the key switch is good. When I checked it has continuity when switched to ON. Where do I need to check next?

Sears craftsman riding mower will not start [ 0 Answers ]

Has gas and spark while its spinning over its popping through the carb and not cranking up. Is it the crank gone bad ?or what do I do?

Sears craftsman 42 inch riding mower won't disengage [ 3 Answers ]

Mower won't disengage. The mower blade drive belt will not go to complete stop. It appears that pulley is stuck, could it be that belt is stretched or does pulley need to be oiled or greased. I have to get under mower & smack pulley to get it to disengage.

Diagram for replacing lawn mower belt on Sears Craftsman 4000 Riding Mower [ 9 Answers ]

I need a diagram on how to replace a belt on the Sears Craftsman II 4000 riding mower


View more questions Search