 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My honeywell thermostat has 5 slots. An RH, RC, which are connected by a jumper wire, a W, Y, and G. I have a red wire, white wire, yellow wire, blue wire, and brown wire coming in from the wall. I can match all of them up except the brown wire. Can you help me with this.
RTH600Sereies themostast. Mine is 1 day ahead and would like to know how to resest it to the right day.
I'm connecting my new thermostat with two wires, one red and one white. When connecting the red wire does it go directly in the rh slot along with the jumper that is already in place? I had it set up this way and my heat would not come on. I put the old thermostat back up and it worked fine. Any...
I hooked up the rct8100, I hooked the wires as followed the red to the rc and rh while both are jumpe together and the white to g. Was that right
Thermostat will not go below 60 when setting temperature for 55 degrees while trying to lower temperature.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
