Ask Experts Questions for FREE Help !
Ask
    Dobey26's Avatar
    Dobey26 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2014, 12:28 PM
    Replacing 20 year old Bryant heat pump stat with new honeywell
    I have an old Bryant heat pump and I'm trying to install a new Honeywell RTH63350D programmable thermostat. I have 8 wires coming through the wall that were all connected to the old stat. Not sure where all the wires should go. Any ideas?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 8, 2014, 12:31 PM
    Directions with the Tstat should show you conventional and heat pump set up.
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #3

    Sep 8, 2014, 03:01 PM
    What is the model # of old stat?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell RTH2300 replacing old honeywell non-programmable. I have a heat pump. Heat [ 1 Answers ]

I needed a programmable thermostat and replaced an older (not that old) Honeywell model with the new RTH2300. It came with Y, W, R, Blue, and G wires. I hooked all the wires up (manual said hook up Blue but not O, which I don't have, for heat pump and put a jumper between Y and W. I've done that,...

Bryant heat pump thermostat to honeywell [ 0 Answers ]

Bryant t-stat BBSHPO1 to RTH7600 Every mode works fine except outdoor unit in heat mode. T-stat has 6 wires.

Trying to replace a bryant heat pump thermostat with a Honeywell rth3100c [ 3 Answers ]

Trying to replace a Bryant heat pump thermostat with 8 wires connected with a Honeywell RTH3100C. Instruction guide says if W1, W2, and Y were connected, contact a HVAC tech. Honeywell customer service was no help. Any ideas?

How do I wire a Honeywell RTH6350D thermostat to my Bryant fb4anf024 heat pump? [ 0 Answers ]

This is the second thermostat I'm installing, which is sort of the heart of the problem. I installed the first one (a Rite Temp) about 18 months ago with a lot less trouble. Of course, I removed an older thermostat, so I was able to label the wires properly, etc. But suddenly the display on the...

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump

View more questions Search