Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Why won't the new starter not move the flywheel when the flywheel will move by hand?
[ 3 Answers ]
The flywheel seems to lock up when trying to start.just put new starter in, the motor turns by hand at the flywheel and front of engine. But yet it seems to try and start but just stops with a clunk.there is no teeth missing from flywheel, made sure to check for that also. Can u Help?
I can get the engine to stop but the car won't turn off all the way
[ 4 Answers ]
Just a quick question.
My car won't start, eletricals all work, but car doesn't even try to turn over.
[ 1 Answers ]
My car has never had any trouble starting. I came out of work yesterday where it was very cold and I put my key in my ignition and then pushed in the clutch fully and turned the key. All the electrical stuff like radio, dash, and lights all work, but the car wouldn't even try to turn over. I heard...
Engine won't turn over
[ 2 Answers ]
I have a 24 hp B&S intek ohv. I have checked ground, cleaned cables, starter was bought at the end of last year only used a few times. I had an auto parts store check the battery and they said it was good, but the battery is over two years old. When I turn the key it turns about a full rotation, it...
Flywheel won't turn
[ 27 Answers ]
Ok, Yardman is several years old (I believe about about ten years or so) but I have had it a few months. Worked fine for awhile. Last few times I would cut it would cut for a good while then it would just cut off. Battery is weak so I would always have to jump it off beforehand. No problem with... View more questions Search
|