 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi there I need to replace the cartridge in a shower mixer valve but every plumbing supplier just scratches their head when they see it. I just need the black part. The brass part of the valve is just for context. The actual problem is the rubber equalizer disk is ripped. It's normally in the...
We have a 16 year old Hansa thermostatic mixer over our bath/shower. The tap was leaking constantly so a plummer capped the shower and bath exit lines. A second plummer attending to another issue found a feed back loop to do with the hot water and the mixer. We now have a kit to fix the mixer but...
Wish list can I or can't .I 1/ Fit combisave to combi boiler in loft. 2/ Lot smaller bath, 3/ hot&cold taps fitted to bath 4/ item 3 above supplied before pressure equalising valve supplying shower oxi diverter mixer made by GREENS INDUSTRIES LTD, 5/isolate bath supply side of oxi diverter...
Please can anybody help me to identify the manufacture and model of my shower mixer cartridge. I have asked three plumbers merchants and they have all drawn a blank. Any information would gladly be received.
Hi there I need to reinstall the cartridge in a shower mixer valve. I have removed the black part and have the new piece but I don't remember how to install the black part again. I believe this a Foremost shower. The last photo is how I think it should be installed. Can anyone confirm this?...
View more questions Search
|
