 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dishwasher flashing light problem
Kenmore model 66516054400 relaced thermal fuse and control panel reset panel normal wash/heated dry 5 times.machine ran for about 10 minutes and quit.now when I push start button it flashes 3 times and goes out and green clean light blinks 7 times
|
||||
|
||||
|
The problem is corrosion on contacts that connect to the circuit board. The old board was good, I bet. Here are some manuals: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
https://dl.dropboxusercontent.com/u/...ishwashers.zip https://dl.dropboxusercontent.com/u/...e%20Manual.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a kenmore dishwasher less than 2 years old and the normal wash cycle light is blinking. The model I have is 665.13469K902. I have read a lot of threads about the same problems and it seems that once replacing parts it works for a little while then stops working again. What are the chances...
I have a Kenmore Ultra dishwasher and the clean light is flashing. The model # is 66516032-402 what can I do?
I have a Kenmore dishwasher 655.15819990 Its Lock on light is on or flashing continuously and no other key will work, except that if I press and hold Cancel/Drain key then the Lock on light will go off, until I release Cancel/Drain key then the Lock on light will go on again. Any help will be...
Kenmore dishwasher clean light is flashing how do I fix
Clean light keeps flashing on my kenmore elite and it will not run
View more questions Search
|
