Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have one switch that controls a light and fan. How do I separate the switches?
[ 1 Answers ]
I thought I was pretty good at simple electrical work but this one has really halted my half bath remodel. I've tried various connections and its not working. Currently, the wires were going to one switch to control the light and the fan. Therefore, they would both come on at the same time....
Wiring diagram for combo light/night light/fan/heater bathroom fixture on one switch
[ 3 Answers ]
I have a combo light/night light/fan/heater in the ceiling in bathroom. There are six wires on the switch 2 black, 2 white one red & one blue. I need a diagram on how to connect. I have three wires (one hot & two others)
I have one switch that controls the light and the fan. How can I make them separate?
[ 4 Answers ]
I bought a two function control switch. In my bathroom there is one switch that turns on the ceiling fan and the wall light at the same time. When I look in the box there is two separate groups of wiring. One group has a white and a blue wire and the other has a red and a white. They put the two...
Wiring hunter fan and light /light to 3 way and fan to on off wall switch
[ 4 Answers ]
I now have both fan and light connected to a three way switch. It works fine. I would like to keep the three way with light, and use the fan on another on/off single switch. A three way duplex would do this. The question is, will I have to run another 12/2 line to the fan And can I use the other...
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and... View more questions Search
|