 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Older Craftsman rider mower. LT 1000. Purchased new in 2001. 42" mower deck. Model No. First, the cable that engages the mower blades to activate is not working. The blades began cutting at the start of the mower. The lever does not signal any stress when you move it up to engage the blade...
I have a Sears 42" cut that I have used extensively for 8 years. This year the mower blades slow down when under even a small load. Is this the belt slipping or something else? I have never changed the belt as I have never had a problem before.
I own a Sears Craftsman riding mower with a 42" deck. It's 17 horsepower. Every time I engage the blades, the engine cuts off. I can't seem to get the cover that is over the pulley on the left off. I've cleared dried grass from under the deck, and have applied WD 40 to the pulley wheels. The blades...
I have aSears rider with 42" cut and the mower will not disengage. It is a mower with a lever that you push up and lock in place to engage the mower. There is a cable on the lever with a spring on the end of it that is hooked to the mower deck. When I pull on it, the mower disengages. Is it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
