Venstar t5800 thermostat

LenM13 Posts: 1, Reputation: 1

New Member

Jul 30, 2014, 08:52 AM

Venstar t5800 thermostat

I have installed the venstar t5800. For some reason the touch creen goes white and keeps trying to reload . It has done this several times. Any thoughts would be appreciated.

Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

Venstar T1800 - Where do I connect my old RC wire to [ 9 Answers ]

I have 5 wires from my old thermostat. Y- Orange Wire RH - Red Wire W - White Wire G- Green Wire RC - Black wire When I connect up the unit according to the manual, I am left with the black RC wire.

Venstar t1800 instal & jumpers. [ 1 Answers ]

I am installing a Venstar T1800 thermostat in my home. I have a heating & AC system--no heat pump or any other devices. Just the furnace and AC. (California State) I checked my system with the old existing (12 years old... with mercury bulbs) Homeywell thermostat before removal & the system worked...

View more questions Search

Check out some similar questions!

Add your answer here.