Ask Experts Questions for FREE Help !
Ask
    kimberlysnodgra's Avatar
    kimberlysnodgra Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2014, 04:21 PM
    My washer will not move on to the next part of a cycle.
    My washer will not move on to the next part of a cycle. It would agitate forever if I let it, unless I move it on manually with the knob. Ideas?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 30, 2014, 04:52 AM
    You need to replace the timer. The timer has a little motor in it that can go bad, but it's best just to replace the whole thing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a quietpak 4 washer that stops part way through the cycle and displays a f 2 [ 0 Answers ]

My quietpak4 stops during the cycle and flashes a f 2 error code I have to push the pause or cancel button then push the star button again to get it to continue. Sometimes this happens several times during a wash cycle sometimes not at all, wheb it does it will show how many minutes are left but it...

How to remove kenmore washer timer part no: 3356457 from washer model 110.92283100? [ 2 Answers ]

My kenmore washer model 110.92283100 does not advance to next function, it still do the work if I use my hand to turn to the next function. So I thought that my washer timer part number 3356457 is at fault. I have no instruction to remove the timer from its control panel and I do not want to break...

Washer part of stackable washer/dryer combo squeaks [ 0 Answers ]

My Frigidaire washer (part of washer/dryer stackable combo) just all of a sudden started a very loud squeaking. Not the dryer. What should I look at to see if its worth fixing. Its about 5 years old.

Whirlpool Estate Washer not going to next cycle. Works great if I manually cycle it. [ 0 Answers ]

The water level is correct. Manually changing the Washer from the initial wash/agitate cycle to the rinse/spin cycle works fine. However, I must also manually advance to each subsequent cycle.

Washer machine will not complete entire cycle. It gets to the spin cycle, and stops. [ 1 Answers ]

I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You

View more questions Search