What lubricant can I use on rusted hinges in walk-in cooler?

avonladyblush Posts: 1, Reputation: 1

New Member

Jul 27, 2014, 10:48 AM

What lubricant can I use on rusted hinges in walk-in cooler?

Walk-in cooler rust on hinges

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Jul 27, 2014, 11:37 AM

Whatever you use, make sure it is FDA approved as it is a food service item.

Add your answer here.

Check out some similar questions!

Walk in cooler [ 3 Answers ]

My walk in cooler won't hit the temperature set when it is hot outside. When the temperature was cold outside my cooler was fine but now its starting to get warmer outside the cooler stays between 42 to 50 degrees when I have it set at 32 degrees.

Walk-in cooler [ 1 Answers ]

I have a walk in cooler charged with 404a with a tev and has a Copeland scroll compressor .noticed system kept clicking off on low pressure so proceeded to add some Freon and forgot to invert my can so I charged with a vapor on suction side . Realizing my error shut down system ,recovered charge...

Walk In Cooler Hinges [ 5 Answers ]

I recently purchased an old wooden walk in cooler door which I am going to use to refinish my basement. They tossed in two heavy iron hinges that were not originally on the door, but I plan to use. The jamb side of the hinge has a single hole through it with a large pin on the back. Were these...