 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rudd achiever 90 plus will not turn on
Unit will not turn on either heat or a/c. fan will not turn on, thermostat is OK have 110 power to all conections on control board 220 to outside unit, no power on thermostat connections on control board no lights on control board (Yes door switch is closed)
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I would like some troubleshooting suggestions for my problem with furnace.It won't turn on,the thermostat is an old mercury type.I can hear a clunk type noise when I reset circuit breaker.How can I isolate the problem ? Thermostat or some other component?
Replaced tstat.. tech added 2 lbs r22.. but it didn't register on his gauge that he had added any... worked for a day.. didnt need heat for 3 days... then had to reset house electrical for cooling to come on... now heat cme on for 5 minutes then went into aux heat...
Hello - Does anyone have instructions how to clean the blower on this model? I recently purchased a house with one of these installed (it is 9 years old). I noticed the previous owner didn't change the filer in some time, so I took care of that, but I fear the blower may not be working as...
Everything was working fine.just went to check the filter.removed access doors and then blower fan would not turn itself off like usual.now the fan runs constant and the burner won't even try to fire.very troubling.
I have a Ruud 90 Achiever, model number RCBA-3765GG17XI, MFD: 2003 using natural gas in my condo. Last week I noticed that the blower was turning on but no heat was coming out. I tried to turning the thermostat to the "off" position and then back to "on". When I did this the pilot would click...
View more questions Search
|
