Ask Experts Questions for FREE Help !
Ask
    Jimmus's Avatar
    Jimmus Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2014, 08:10 AM
    I need an Essex gas control valve 190-2002-26
    The gas control valve in our Johnson furnace is leaking. The model # of the furnace is HAS 130A and the serial# is 035461. The gas control valve is an Essex valve the# is 190-2002-26. How can I find one? HELP!

    Is there a comparable one that can race the Essex valve? Jimmy'sJimmy's
    bitters's Avatar
    bitters Posts: 348, Reputation: 12
    Full Member
    		  
    #2

    Jul 24, 2014, 01:08 PM
    Yes, just go with a basic honeywell valve. They come in two sizes 3/4" or 1/2". Most are 1/2", so you will need to check yours.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing gas control valve [ 2 Answers ]

Need directions on how to replace gas control valve on a Whirlpool water heater

Itt gas control valve [ 0 Answers ]

I have a Duo-therm propane heater on a travel trailer. It has an ITT gas control valve with a 12V solenoid catalog no. 265044? or 28SD44? Anyway there are 2 screws to the left of the pilot adjustment red button and I am wondering what the initial settings for these screws should be? Thanks, ...

SFC Gas Fireplace Gas control valve [ 3 Answers ]

I have gas powered SFC fire place model xDVR5-CMNS serial# 018813 and need to replace the gas control valve. I have tried to contact the company and they are out of business. Can someone tell me where I can get this part of if an alternative exists? Thx

Using older gas control valve [ 0 Answers ]

Hi, I have a armstrong sideways funace in my crawlspace the m#G8A1000DC14-18 S#A38261CCA.the polit light wasn't staying on after trying to light it.So I replaced the thermocouple that didn't help.So not having a lot of money I took the gas control valve off my garage furnace and put it on my...

Using johnson control on honeywell gas valve [ 1 Answers ]

I have a new honeywell gas valve for my furnace M# VR8345M 4302. I am trying to use a Johnson Ignition Control G770 MGC-3 to operate This valve. The problem is I want to use the intermittent function of this honeywell valve And the johnson igniter control has no provision for the mv/pv on the...

View more questions Search