Ask Experts Questions for FREE Help !
Ask
    bigjay303's Avatar
    bigjay303 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 14, 2014, 03:13 PM
    John deere LA100 need help titaning gear/clutch belt slack,
    I need to know how to titan the gear belt I believe it's called. I know there's 2 belt, one is the drive belt which spins the blades. I need help with belt that's above that, which works with the clutch and gear box. I don't know what to a just to remove the slack?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 18, 2014, 11:02 PM
    Hi,
    Most easily done with deck removed. Lock park brake and check the linkages. There is no way per se, except some of the flat idlers are bolted on a slot. Most are not, but you either have something crooked or a non-Deere belt.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The clutch on my john deere l100 [ 0 Answers ]

When starting to engage ground movement the tractor will "jump" violently when the clutch/brake pedal is fully released. How do I adjust the clutch for a smooth engagement?

Driving problems with John Deere LA100 [ 1 Answers ]

My LA100 has developed a problem when I put it in gears 4 and 5. It runs fine in lower gears and in reverse, but boggs down on an incline and I have to move it to gear 1. The belt looks fine, so can't figure out what the problem is.

New drive belt for John deere 130 lawn tractor and clutch will not disengage [ 2 Answers ]

I just had the "fun" of putting a new drive belt on a 1986 130John Deere lawn tractor. I purchased the belt from my local John Deere dealer. My problem is it will not release when the clutch is pushed down. The clutch is working. Is there any adjustment on the clutch linkage. Steve

La100 john deere starts but mower will not? [ 0 Answers ]

I have a john deere la100. Recently I was moving some tall grass but had to get off the mower to remove some brush. I turned the mower off but left the engine running. When I got back on the mower, I put pulled the lever that makes the blades run again but this time it would not. I discovered...

John deere how to install transmission drive belt in C111HL John Deere tractor [ 1 Answers ]

Need step by step to to install transmission drive belt in C111HL John Deere Tractor

View more questions Search