Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I moved my well tank, now the pressure builds up too high and trips the relief valve.
[ 4 Answers ]
I moved my well tank to the crawl space. I replumbed everything with no problems. Turned the power on, the pump and lines are hammering. Pressure gauge reads 100 and relief valve trips. What is wrong?
Lake pump, pressure relief valve
[ 2 Answers ]
I plan to install a 1hp irrigation pump to water my lawn from a lake. The yard is about 15' above the lake and I need to run about 10 sprinkler heads. I think the pump will probably have more capacity than the 10 heads will require but I'm not quite sure. This pump will run on a timer while I am...
Shallow well pump pressure tank
[ 2 Answers ]
Pump holds prime and found no leaks but after a few times we run the water or flush the toilet we lose water pressure and eventually lose water completely. Pump has a reset button and when we push that water returns but after each flush or two we have to keep hitting the reset button. We have to go...
New shallow well pump new huge pressure tank but water pressure is terrible
[ 11 Answers ]
When I had a smaller pump (shallow well) and small tank my water pressure was great. When I had to replace everything the person installing the system put a bigger pump and a huge pressure tank. It is the size of a 50 gal water heater. I replaced everything. Ever since then my water pressure is...
Leaking pressure relief valve on h/w tank
[ 4 Answers ]
The pressure relief valve keeps leaking. The h/w tank is about 9 months old. The problem started when the main line broke. The township had to turn my water off and when they fixed it and turned the water back on is when it started. Any help towards a solution is always appreciated. :) View more questions Search
|