Ask Experts Questions for FREE Help !
Ask
    DRBidwell's Avatar
    DRBidwell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 11, 2014, 12:00 PM
    Blades Won't Engage
    I have a Murray mower model 46500X92A. 46" mowing deck. Blades do not turn when engaged. Stack pulley does not turn.

Check out some similar questions!

Mower blades won't engage [ 2 Answers ]

Have 21 HP 46 in Craftsman riding mower 917 288520. Had to replace bent mower blade. Tipped up to replace blades and now mower deck won't engage. Starts and runs fine but blades won't engage. Belt looks in place. Any suggestions?

Belt won't tighten on craftsman mover and blades won't engage [ 1 Answers ]

We put a new belt on deck but the belt is real loose and the blades do not engage, it's really hard to engage the blades as well . Model 28928

Mower Blades won't engage [ 2 Answers ]

When I pull the blade switch on my Craftsman 16.5 hp riding mower, nothing happens. I had this problem previously, and it was the PTO. Since that was a year ago, I really don't think it's that. Recently when the blades wouldn't engage, I checked/wiggled the wiring to the PTO, and the blades did...

Troybuilt mower blades won't engage [ 4 Answers ]

PTO not engaging

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.