Ask Experts Questions for FREE Help !
Ask
    Jmar007's Avatar
    Jmar007 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2014, 05:32 AM
    My fan works but the light is shorted out.
    I was changing one of the light bulbs on my hamptonbay ceiling fan and the fan lights shorted out. The fan works, the switch seems to be good but the lights won't come on.
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    Jul 9, 2014, 10:34 AM
    new fans are very inexpensive...
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Jul 10, 2014, 01:19 AM
    You may have to change all of the bulbs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

We installed a new ceiling fan/light, fan works but not the light-help! [ 2 Answers ]

The brand is "Turn of the Century" & was purchased at Menards/ We checked out what was recommended in the "troubleshooting" area of the directions.

My harbor breeze fan/light does not work the light only works by pull chain [ 3 Answers ]

The harbor breeze fan/light does not work with remote. Thae light works by pull chain but fan does not. The light on remote turns on when I press light or fan , but does not work fan or light

Remote works, light works, fan humms does not turn [ 2 Answers ]

Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...

Fan works but light doesn't. Fixed and now the light works but fan doesn't [ 9 Answers ]

While I was at college somehow my fan stopped working. There is absolutely no explination from anybody but my mom did get a replacement so I didn't care too much. The fan has a ground from the mount(copper), ground from the middle of the fan(copper), a hot for the light(blue), hot for the...

Bathroom fan/light: light works, fan doesn't [ 3 Answers ]

I'm back with more "finishing basement" questions. This weekend, I wired my bathroom. This is 20 amp service with 12 ga wire. For the bath fan/light, the power source came into the switch box (1 box, 2 switches) on a 12/2 wire. From there, power goes up to the light/fan on a 12/3 wire. Red goes...

View more questions Search