Rewireing 2 tiered lamp

Cubbird828 Posts: 1, Reputation: 1

New Member

Jul 5, 2014, 07:14 PM

Rewireing 2 tiered lamp

How do I rewire a 2 globe hurricane lamp one above the other,and have both bulbs work on one on/off switch on the bases

hkstroud Posts: 11,929, Reputation: 899

Home Improvement & Construction Expert

Jul 6, 2014, 06:14 AM

Attached Images

Add your answer here.

Check out some similar questions!

Flat tax or tiered? [ 25 Answers ]

Anything less than a flat rate tax... where everyone pays the same percentage... without any credits or deductions isn't going to be fair. So there is a lot of unfairness going around... problem is its unlikely to ever be fair. Until it is... you hire a competent tax preparer who can find...

Should we replace our 4-lamp fluorescent fixtures with new 2-lamp or 3-lamp [ 1 Answers ]

We are replacing our 4-lamp T-12 fluorescent fixtures. One vendor suggests new 2-lamp fixtures while another tells us 2-lamps will not provide enough light and suggests 3-lamps. I want proper lighting but don't want to pay any more than necessary.

Can I run a 2 lamp fixture with a 4 lamp ballast? [ 1 Answers ]

I recently bought some Lithonia fixtres from HD with GESB electronic ballasts. They don't Physically hum but do cause a lot of interference with FM reception. Since I do a lot Of FM tuner alignments, these were unacceptable. I phoned Lithonia (actually Accupro - the 1-800 number is right on the...

Rewireing bt land line box [ 1 Answers ]

Hiah My friends phone line was dead ,tried other phones still dead, so replaced the phone socket, Using the 2 wires I disconnected ,not sure what colours they are, as forgot 2 take note and not going back until after six , connected into slot 2 and 5 still dead so switched the wires still with 2...