Ask Experts Questions for FREE Help !
Ask
    pebwrites's Avatar
    pebwrites Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 4, 2014, 07:03 AM
    Landscapers broke a water line, turned off well pump no pressure
    Landscapers broke my water line; I'm on a shared well. My line was fixed and water restored. Other well users have little or no water pressure. What do I do?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jul 4, 2014, 07:51 AM
    Other well users have little or no water pressure.
    you have pressure, is that correct? Do the other user have a filter? If so, check a clean the filter. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replaced water heater turned water back on and cold water pressure was very low [ 1 Answers ]

Replaced water heater when water was turned back on the cold water pressure was very low the hot was fine.

The water line to my outside spigot broke now I don't have any running water inside, [ 3 Answers ]

My outside water spigot line broke and now I don't have any inside running water, any suggestions. Thanks Hal

After changing hot water hose turned water on no pressure in my house [ 1 Answers ]

If u let it sit it builds up for aout 2min then it gradule goes away until its just a drip

When water is turned on Pump cycles on and off before pressure builds back up [ 5 Answers ]

Ok this is a new system Wellsaver Tank LPT-20 up right tank, and WaterAce RTS7 pump. Water Pressues is great and even with the pump cycling on and off still have great water pressure. This is my vac home and when I installed it last year it work great right out of box. The voltage...

View more questions Search