Ask Experts Questions for FREE Help !
Ask
    persianoldman's Avatar
    persianoldman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2014, 08:58 AM
    Changing Tub Spout with Diverter
    We have a Moen shower system with an IPS 5 1/2 inch tub spout with shower diverter. The problem is that Moen does not make this model any longer in the Antique Bronze that we have. I have found only slip-on tub diverter with close enoung color.

    My question is, "Can I change the nipple from Brass (or Iron) nipple to a slip-on brass or copper pipe?" And, if so, how do I do that? I don't have an easy access to inshide the wall where the valves are.

    Thanks.
    Persian Old Man
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 30, 2014, 09:57 AM
    Can I change the nipple from Brass (or no problems Iron) nipple to a slip-on brass or copper pipe?" And, if so, how do I do that?
    no problem! Simply take a wrench and unscrew the nipple. Purchase a 1/2 inch male adapter and about four or 5 inches of hard copper tubing. Solder on the adapter, Teflon tape the threads and screw it back into the valve body. You may now install your slip-on spout. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower w/o diverter. Will a diverter tub spout give me a shower and bath option? [ 4 Answers ]

Had k-t14776 and k-304-ks recently installed. Now I'm told I have no shower capability. Will purchasing a diverter tub spout give me options for both a shower and bath?

Can I replace a slip on tub spout with no diverter to a tub spout with a diverter? [ 1 Answers ]

I have a slip on tub spout that has no diverter. I would like to exchange this tub spout with one that has a diverter.

Tub spout diverter? [ 12 Answers ]

Hello I'm not sure what it is called but the kids were in the shower Somehow the mechanism which diverts the water from the spout to the shower fell off I've tried a few ways to put it back but it doesn't seem to work. It's a plastic piece with a rubber o ring on the other side with the pin...

Tub Spout Diverter [ 4 Answers ]

So my old tub spout's diverter stopped working and got stuck, leaving me unable to divert the shower head. I bought a new one, and it seems to work fine except for some reason there is a second hole under the diverter, preventing the water from being diverted to the shower head. Any idea what to...

View more questions Search