 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If the starter motor cranks the engine and if the Check Engine Light comes on for 2 seconds and then goes out, when the ignition switch is turned to ON (Position II), then focus on the distributor. Normally, replacing the Ignition Control Module (ICM) solves the problem. Be sure to apply silicone heat transfer compound to the back of the new ICM, otherwise it won't last long.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Would someone be able to tell me if the wheels on an 1986 Honda Accord are interchangeable with those of a 1996 Honda Accord. Thank you
When ever I make frequent stops and shut my car off sometimes it won't start back up again for a little while some one told me that it was a bad sensor
I got a 1992 honda accord and would like to put a 1996 honda accord engine and trans in it. Would it be possibly.
Hello could anyone tell me why my check engine light all of a sudden came on after getting a fill up of gas I have no type of inducation that anything is really wrong with the car
I need help in trouble shooting a heating problem ? I purchase a 1996 Honda Accord Lx and I notice the first month I had the car it was in cold weather so the temperature gauge stayed pretty much an inch below the half line. Now since , its getting hot the car goes sometime almost to the hot but it...
View more questions Search
|
