Check out some similar questions!
I have a tempstar furnace that when calling for heat will ignite and go out.
[ 1 Answers ]
My Tempstar furnace will ignite and then go out when calling for heat. This will repeat itself several times before remaining lit. Any suggestions for repair? I have taken the pilot assembly off and cleaning it. Cleaned the sensor wire connection and all mating surfaces.I do know it is a smart...
Determine the coefficients in redox reaction using half-reaction method
[ 0 Answers ]
I2 + Cl2+H2O --> HIO3- + HCl
Thermostat Calling for Heat but Furnace Shuts Off
[ 6 Answers ]
I have a gas forced-air furnace 3-5yrs old. Honeywell setback type thermostat (set to "HOLDTEMP") My problem is the furnace seems to shut off before it reaches set point (ussually 4-6 degrees below set point) I changed the thermostat and still the same issue. If I turn the power off to the...
Heil Furnace - No response when calling for heat
[ 3 Answers ]
I have a 5 year old 90% efficient Heil Furnace. I get no response when I call for heat. (the "blower only" setting works fine.) I have confirmed that it is not the thermostat and that the fan control board has power. The gas valve light pulsates to indicate that it is OK. The lead that goes to the... View more questions Search
Add your answer here.
|