Ask Experts Questions for FREE Help !
Ask
    Enyeribe Aharan's Avatar
    Enyeribe Aharan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 28, 2014, 11:09 AM
    Range hood lighting.
    WHAT TYPE OF LIGHTING IS REQUIRED FOR A RANGE HOOD? I have a job where the client would like me to install two light fixtures on the inside of the hood. Is this allowed? If so, is there a specific type of fixture that i must use?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jun 28, 2014, 01:55 PM
    What is your role? Are you an electrician?

    Are you in the US? If so see NEC 410.10(C).
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jun 28, 2014, 04:49 PM
    Commercial range hood? Download NFPA 96.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Range hood [ 2 Answers ]

Have on of those range hood that is convertible. Duct or ductless. Mine just re circles Air into a filter. Problem is on the front of the hood, there are vents, and air is coming out. When it is running and not going into the filter. I think those vents are for duct work setup. What to do?

Replament Range Hood has no where for air to go. [ 2 Answers ]

There was no vent in old one. Air had no where to go. Is it OK to cut a hole in the dry wall and have it vent into the space between the walls? Can't duct up because of a room or straight back because of the dining room. Ducting out would require removing the cabnests, opening the dry wall,...

Range hood electrical [ 1 Answers ]

I am installing a Broan Allure I range hood but the house electrical is on the left side of the duct work and not long enough to reach the knockout for the wires which is on the right side of the appliance. What can be done in order to make this work? Is splicing the wires an option?

Range Hood Microwave install [ 1 Answers ]

Hi, I am replacing a standard range hood with a microwave and have a problem. I agree that it was way to low, so I took a few inches off the cabinet and it seems to be an OK height, but it is deeper than the cabinets so it sticks out and blocks the range top. I only need a few inches. ...

View more questions Search