I have a 3 gang meter rated for 100 amps each,what size cable do I use from the mast

superdave1948 Posts: 1, Reputation: 1

New Member

Jun 25, 2014, 08:42 AM

I have a 3 gang meter rated for 100 amps each,what size cable do I use from the mast

I just did

donf Posts: 5,679, Reputation: 582

Printers & Electronics Expert

Jun 25, 2014, 09:28 AM

"Just did what?" Can you help us just a tad!

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Jun 25, 2014, 12:00 PM

What is the calculated load for the whole building?

Add your answer here.

Check out some similar questions!

How to install 2 gang meter to 2 / 100 amps breakers [ 1 Answers ]

I own a 2 floor house andI would like to install a 2 gang meter to feed 2/ 100 amps breaker box each one, I want to find out wich wire to use and if is necessary a by pass or it is coming into the box (2 gang),I appreciate for any information post here...

What size entrance cable for 100 amp box run is 100ft from meter [ 10 Answers ]

What size entrance wire do I need meter to box is 100 feet so I need a wire size

Wiring 2 Gang Meter Socket w/ 100 & 200 Amp Meters [ 10 Answers ]

Hello, Are you allowed to use a 2 gang 200 amp meter socket to feed (1) 200 AMP panel and (1) 100 AMP panel, or do all meters in same enclosure have to be the same (200 AMP)? If the above is allowed: What size wire would I need from weather head to meter socket? Would I then run...

What Size Wire Do I Need to Carry 100 Amps [ 3 Answers ]

If I have 100 amps at 480 what will I have if I transfom it down to 208 three phase?

What size of cable suitable_ 40 Amps, 250'/ 200'? [ 5 Answers ]

Hello- I would like some information on wire AWG and grounding requirements with regards to generators. I set up remotely located mineral exploration camps in BC Canada- I am not an electrician... but would like to have some general information, and have an interest in electrical. Our camps...