 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fluid engineering
A centrifugal pump is used to supply water to a 10 floor building which consist of 35 flats each flat is occupied by 6 persons
1-Work out daily water requirement the under ground and over head tank capacity Assume that each person require 35 gallon of water/day 2-Estimate the pumping rate of the pump the pumping of water is controlled automatically using automatic water level switches. |
||||
|
||||
|
Fluid engineering
A centrifugal pump is used to supply water to a over head tank located at the top of a 10 floor building ,tank capicity=30cu.m, Estimate size of rising main to over head tank select most suitable pump from lawora pump catalog ,Estimate power require which fit in the system Assume total length pipe=50m,Elevation difference of water level 31m,fitting used=2 gate valve,6 elbow 90 degree,1 check valve ,Maximum running time of pump is 2hrs/day.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My dad was diagnoes with elbow bursitis and he woke up this morning and he said his elbow looked like a sack of water. Is it dangerous? And is it the fluid filled bursa?
Which gives more salary ?(civil engineering or mechanical engineering)
Hi, All! I was told by someone, who is not a mechanic by trade, that my brake fluid was getting lower in the fluid cylinder and that I needed a brake job. There don't appear to be any leaks, my brakes seem to work fine and there are no noises. He made it seem like brake failure was...
I bought a 20 oz. bottle of "lucas oil automatic transmission fluid conditioner" for my 93 ford taurus 3.8L V6 automatic GL. It has 145,000 miles on it. I want to add a 20 oz. bottle of this lucas oil transmission fluid conditioner but don't know if I should remove some of my AT fluid before I...
View more questions Search
|
