 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs and Stratton Troubleshooting carb leak
I have a Briggs engine on my riding mower. The fuel line where it goes into the carb there is a plastic right angle fitting. Gas is leaking from around the plug. Does the plug have threads. How can it be replaced?
|
||||
|
||||
|
Hi,
Most one with plastic are pressed into the body of the carb. It is difficult to give a definitive answer since no numbers were provided. Most will have plastic nipples attached to metal bodies, some of which are threaded and most not. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My not quite 2 year old Briggs & Stratton lawnmower starts but only runs about 10 seconds, then quits. I have cleaned the air filter, checked the spark plug & nothing. My neighbors are going to get tired of me borrowing their lawnmowers & I really do not like to use something that belongs to...
I have a 190cc engine on a craftsman mower. I will not start unless I pour gas into the carb. Tha tank is full and the gas lines are not pluged. What needs to be done?
I have a 15.5 briggs and stratton engine that backfires thorough the carberator put carb kit in it plug is firing and replaced flywheel key
I have a 18.5hp briggs opposed cylinder engine. It has started using about twice as much gas to mow. The airfilter is clean when you run it full throttle it seems to flood some and run rough and has lost power and it smokes a little black smoke. But when you run it at an idle or about half throttle...
Got a murray push mower w/3.5 hp classic 9d902 2005 b2 00122851 b&s motor--primer bulb rotted away-installed new snap in bulb--opened up carb checked out for any gummy build up or bulb fragements -found none----primer won't squirt gas in carb unless you pour a little gas in carb--starts great then...
View more questions Search
|
