 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Contactor works but condenser and fan don't turn on
I have replaced the contactor, and capacitor, when I restore power to the unit I can hear the contactor activate (visually confirmed as well), but compressor and fan do nothing. Read a ton of forums on troubleshooting and checked fan blades they spin freely. Anyone know what I can do? Please help.
|
||||
Check out some similar questions!
Central air system turned on, condenser fan and compressor not running. Reset button is tripped. Press reset , contactor closes compressor motor starts, condenser fan does not start. 20 seconds later reset trips shutting down compressor. Same result even after letting sit overnight. Old Williamson...
Contactor and fan when I manually puh in I have 24v going into defrost board but nothing out
Here's the scenerio... Yesterday afternoon, my condenser fan stopped running, but I could hear my compressor running and the relief valve was hissing. Made a trip to my favorite supply warehouse, picked up a new fan motor and dual cap. Installed them and nothing. Well, the compressor...
Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...
I resest the condenser outside, and tested the thermostat but fan still not blowing what do I do? I have a rheem outside and a gamma inside
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
