 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replace Riding Mower Fuse Craftsman 917.289223
Can anyone tell me EXACTLY WHERE the fuse is on my newer riding lawnmower? It's apparently a needle in haystack location, because I've searched the mower high/low (no luck), combed the electrical schematic which showed general area, but not where fuse was, contacted SearsParts helpline (no luck) & even wen't to my local Sears store who sold me a package of 20amp fuses, but couldn't tell me where the fuse is on a floor model almost identical to mine - go figure! The mower is a Craftsman 21hp 42" (Platinum 540cc) YTS 3000 w/electric start. Model 917.289223
|
||||
Check out some similar questions!
Myrider shuts down after approx 10-15 minuts of mowing. Cannot restart, have to wait 10-15 minuts. Will start, will mow for maybe 5 min, shuts down again. Possible defective fuse?
How do you put on belt of craftsman 917.276.240 riding mower
16hp Craftsman Riding Mower # 917-271643 will not stay running. I can get it to run for only a few seconds with starting fluid but it sounds really weak and it just dies out.
The gear shift works very hard, particularly since I adjusted the brake. Does the brake adjustment effect the gear shift? If so, is it as simple as readjusting the brake? If not, how do I get the gear shift to move more freely? Thanks!
I have a 1996 Craftsman 15.5 hp BRigg/Strat. I/C Gold 42", 6 speed Model #917.256810 and I need a owners Manual.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
