Ask Experts Questions for FREE Help !
Ask
    mpz17315's Avatar
    mpz17315 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2014, 07:47 PM
    Twist lock won't fit into the weatherproof box
    This L5 twist lock won't fit into the weatherproof box. This was the deepest weatherproof box I could find. Any suggestion for an east fix?
    Name: DSC04071.jpg Views: 2470 Size: 83.5 KB
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jun 7, 2014, 01:59 AM
    Hi mpz, what is the plug for? May be easiest to change the end out.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jun 7, 2014, 04:01 AM
    Go to a real electrical supply house. They'll have what you need.
    If not there's always the internet.
    mpz17315's Avatar
    mpz17315 Posts: 10, Reputation: 1
    New Member
    		  
    #4

    Jun 7, 2014, 07:18 AM
    I took the plug with me and went to a real electrical supply house and that's what they gave me, it a pool pump plug, 20 AMP, l5 twist, 115V pump.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #5

    Jun 7, 2014, 09:05 AM
    Ouch. That's sad, especially since you had it with you.
    Here: While-In-Use Covers | by Legrand
    Single Gang Deep While-In-Use Cover, Gray, WIUC10DGL | by Legrand
    Gray/Gray 1 Gang Deep While-In-Use Cover at Menards
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #6

    Jun 7, 2014, 03:50 PM
    I've never seen an in-use that would accommodate a twist-lock plug. Good luck.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #7

    Jun 7, 2014, 05:20 PM
    I've never seen an in-use that would accommodate a twist-lock plug. Good luck.
    You must not do many pools then. They almost all do. The depth is usually the issue.
    mpz17315's Avatar
    mpz17315 Posts: 10, Reputation: 1
    New Member
    		  
    #8

    Jun 10, 2014, 04:56 AM
    Thank you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My boat has a 3 prong twist lockfemale & the generator has a 4 prong twist lock male [ 1 Answers ]

Can I make a adapter so I can plug into my boat into my generator> I have looked everywhere for an adapter and cannot find one.

Twist Lock Plug [ 1 Answers ]

I guess I am out of luck. Twist Lock Plug will not fit into the three hole connector. See picture Unless there is some king of adapter. The other end works great fits into the socket well Of the weed trimmer okay. But the twist lock plug on the other end will not fit the three hole connector On...

Offset twist-n-fit closet flange [ 1 Answers ]

I need to replace a offset cast iron closet flange.Does anyone know of a twist-n-fit for this?

Making a twist lock power cord [ 5 Answers ]

I have a 5,000w Coleman Powermate generator. I just installed a Gould transfer switch. Now I just need to connect them together. The Coleman requires an L6-20P 3 prong and the Gould requires an L14-20R 4 slots. I cannot find any such cable. I can buy a Levitron L6-20 plug and a L14-20...

What is a twist lock receptacle and purpose of use? [ 4 Answers ]

What is a twist lock receptacle and purpose of use?

View more questions Search