Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
State select gas water heater model pr675xrvit has no power to gas valve.
[ 1 Answers ]
The water heater quit working. I found that water supply was leaking so I tightened the connection and that fixed the leak. Now there is no power to the gas valve. I checked power at toggle switch and all is good. When looking at igniter I encountered water at the flame sensor and the insulation...
Will natural gas used for a water heater and gas stove produce EtG?
[ 4 Answers ]
I recently moved into a small apartment with an exposed water heater which uses natural gas. I found the major constituent in natural gas is methane, but was unable to determine if ethanol is also in natural gas. Worried about incidental exposure through alcohol fumes from the pilot
No or very slow hot water from gas water heater, heater makes lot of sounds
[ 1 Answers ]
There is problem with our hot water system, not getting hot water while as cold water is OK. Starting hot water there is lot of explosion sort of sounds from water cylinder and hot water will start dribbling and stops after some time.
State Gas Water Heater- md# gs650ybrt -. Heater won't stay lit.
[ 1 Answers ]
Statye gas water heater model gs650ybrt. Heater won't stay lit
Flexi vs. Black iron gas line to water heater gas valve
[ 3 Answers ]
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes... View more questions Search
|