Ask Experts Questions for FREE Help !
Ask
    hadholenbeck's Avatar
    hadholenbeck Posts: 1, Reputation: 1
    New Member
     
    #1

    May 24, 2014, 01:07 PM
    Feed power to two switches in same bow and an outlet separete box
    Power feed to switch box that controls three switches. Two lights and a fan switch. But need to also have a receptacle hot all the time that is in a different box than the switches.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #2

    May 25, 2014, 07:51 AM
    I know you are trying to get right to the point, but you need to describe the situation a little better. Are you feeding a box or is the power there already? Are you putting is switches, are they there, what is the question?
    Try asking the question in story form. Tell us what you want or have, what you plan on doing and then tell us how we can help. No need to be technical, abbreviated or any other special requirements. Just ask like one friend to another.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Outlet box for power [ 6 Answers ]

Is there any thing wrong with wiring the ceiling fan to the outlet box. The power source goes to the switch first. The outlet is not switched and the fan will have no light on it. Thanks so much JIM

Addig a new electrical outlet to the middle switch in a box with three switches. [ 2 Answers ]

Thank you in advance for any help you are able to give me. I am attempting to add an outlet. I want it to be controlled by an existing switch which is in a box as a group of three. The middle switch controlled the ceiling fan light. I connected two wire romex cable to the new outlet. Then I...

How do I wire a GF outlet and a switch in double box with a 12/2 feed only? [ 7 Answers ]

This is a new construction but sheetrock is up... I need to make one ground fault outlet and one switch to a vainity light in one double box... the only wire that was put in is a 12/2 wire. One Black, one white, one ground. I would like the outlet to be always hot if possible, but if not I guess...

I have a 3-wire 240 VAC power box, and would like to install a 120 VAC outlet from it [ 4 Answers ]

Do I just take power from one leg and ground? If so, how do I ground the outlet?

Running two switches from ine power source through junction box [ 1 Answers ]

I have come up against a problem with some electrical in my house. The previous owners did some very "inventive" things and I am trying to re-wire some lighting in my kitchen. Here's the situation. I have power coming into a junction box (not the best I know, but old house). The power is to...


View more questions Search