Ask Experts Questions for FREE Help !
Ask
    remodel123's Avatar
    remodel123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 10, 2014, 06:12 AM
    Faucet hole size
    I bought a vessel sink with a single hole on top for faucet. The faucet hole is 1.375". The faucet I want to buy is 1.125" will that work? Or do the sizes need to match perfect? THANKS
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 10, 2014, 03:57 PM
    1/8" around if centered. Should be fine but you can wrap some good cloth or metal tape around the threads at the sink level. Hopefully the faucet base is wide enough to cover the hole.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears craftsman lt 1000 blade hole size [ 1 Answers ]

Need to know the proper bolt hole for the lt 1000 craftsman mower - star or round hole

Five Hole Sink Faucet [ 3 Answers ]

I am looking for an 8" deck mount faucet for a three compartment home sink. Compartments are Bowl-Disposer-Bowl. Faucet setup is: (1) Soap Dispenser (2) Pull up for left compartment Basket (3) Single lever faucet and spout (4) Pull up for right compartment Basket (5) Hose & spray.

4 Hole Kitchen Faucet Template [ 1 Answers ]

I am installing a 4 hole Price Pfister kitchen faucet in a corian counter top. There is currently a single hole faucet there and I need to locate a template to use for the holes. Is there anywhere I can print the template from? I am very handy, but never too proud to take suggestions. Thank you

Increasing Hole Size In Granite Countertop [ 7 Answers ]

I have a granite kitchen countertop with a 3/4" hole that was used for a filtered water spigot. I am replacing the filtered water with a Hot Water Dispenser. How do I increase the 3/4" hole to between 1 1/4" to 1 1/2"?

Kitchen sink - drain hole size [ 9 Answers ]

Remodeling kitchen... Kitchen sink we want has 3-3/4" drain hole, although most sinks appear to have a standard 3-1/2" drain hole. Our garbage disposal documentation doesn't state the drain hole size, although current sink appears to be 3-1/2" drain hole... Garbage disposal is a Badger 1...

View more questions Search