My mpi 41 will not fire. What could it be?

bplaflamme Posts: 1, Reputation: 1

New Member

Apr 20, 2014, 05:05 PM

My mpi 41 will not fire. What could it be?

The fuel is not a problem. I cleaned the filter a short while ago and it has been working since then. The fuel line is hooked to another monitor also and it is still working. It makes no noise at all. What could it be?

Check out some similar questions!

88 ford taurus wagon has no fire replaced coil still no fire , why [ 4 Answers ]

Replaced the coil plugs wires cap and rotor but still have no fire . Am I missing something?

Accidentally started fire in apartment the fire alarm never went off ,am I responsible [ 3 Answers ]

I left some stuff on top of the stove and turn on the oven but the top of stove came on and burned the kitchen up. . The smoke alarm never went off to alarm me .Am I fully responsible for paying all the cost, Is the landlord responsible for the smoke alarm working,

Monitor MPI 22 kerosene heater issues [ 0 Answers ]

My heater will sound like its starting up fine with the fan and all and the status/burner light on top will go up from bar to bar but then when it gets to the last bar it clicks off and the light starts flashing. My 7 year old son may have been messing with the on/off switch and pressed it a bunch...

Does a older mpi 41 monitor heater need a pump to run. [ 0 Answers ]

I know it has a pump to inject the oil into the chamber but what about getting oil to fill the bowl down bottom.. will gravity feed work.

Free help with monitor heater mpi 41wont fire [ 0 Answers ]

Ny mpi 41 monitor heater will not fire.. it turns on and sounds like it will work but there is no spark or any flame nor is there any warning lights that's flash or come on.

View more questions Search

Check out some similar questions!

Add your answer here.