Ask Experts Questions for FREE Help !
Ask
    wideglider's Avatar
    wideglider Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Apr 17, 2014, 04:07 PM
    How to stop an older top load washing machine from shaking?
    Maytag model # A613 washing machine shakes and sometimes walks. I have changed the 2 belts and leveled the machine. I took the front panel off. The springs look fine. The tub rocks and rolls while spinning. The loads are even. I even washed a small load with 3 items. The tub still shook. I don't know what part I should replace next Thanks in advance for any help
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 17, 2014, 04:47 PM
    Show a picture of where the drain hose connects to the plumbing pipe.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Suggestion on conventional top load washing machine purchase [ 3 Answers ]

Old washer gave up the ghost. Need new one. Will absolutely not entertain any idea of an HE washer. Been there done that mildew smells and twisted jeans and washing the washer not in the realm of possibility. As large as capacity as possible. And would prefer to avoid this new locking...

I have a 17 year kitchenaid top load washing machine and the agitator is not working [ 1 Answers ]

I have a kitchenaid washing machine and the bottom portion of the agitator only turns briskly in one direction in the normal cycle. The agitator won't wig wag and it makes aloud thumping noise.The clothes get all wrapped up tight around the agitator as a result.The only cycle that it agitates...

Top load whirlpool style washing machine will not spin [ 1 Answers ]

I have removed motor and gearbox/transmission from cabinet. I had to replace the drive/motor coupler on a previous washer so I thought that may have been the problem this time also. I separated the motor from gear box to check the coupler. It was NOT broken. I tried to start the washer with it out...

View more questions Search