Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I had a ceiling fan with a broken pull chain switch. I removed the switch and connect
[ 0 Answers ]
Ceiling fan wiring
How to pigtail light switches one switch to split wire repetacle other switch to ligh
[ 3 Answers ]
Needing to run power to splitwire receptacle to a two gang box using one switch to control receptacle and pigtailing from switch to receptacle to another switch going to two lights.. looking to see if someone can help me diagram that
Had no water banged on pressure switch started working so changed out switch worked
[ 7 Answers ]
Had no water Friday night. Banged on switch sat morning and it starting working for a few minutes. Changed out switch sat. afternoon work until Monday morning. Now now water and the breaker is tripped. When I wired it up I put the two wires coming from pump one red and the other black on the two...
Brake/clutch engine start interlock switch (limit switch per Murray)
[ 0 Answers ]
I have a 12 yr old,10hp, 30inch cut Murray riding mower which wouldn't start. After eliminating the battery, starter, solenoid and ignition switch as being the problem, I found that the plate that slides backwards to depress the button on the interlock switch is not coming back far enough to...
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location. View more questions Search
|