Ask Experts Questions for FREE Help !
Ask
    lwlight's Avatar
    lwlight Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 7, 2014, 08:00 PM
    Day night furnace not coming on
    My furnace/ac has stopped coming on. The sensor light is blinking code 24 which says it is a possible reversed polarity or a short in the 24v. What do I need to check?

    Thanks

Check out some similar questions!

Day and night furnace [ 2 Answers ]

I had a Day and Night 60,000btu furnace installed recently. When it turns on there is a high pitched whine that continues as the blower engages. It is very annoying. Is this normal?

Furnace coming on and going off several times at night [ 0 Answers ]

Ok, here goes! My gas furnace keeps kicking on and going off several times in one cycle, and it seems to do it at night only and does it all night! The blower comes on and then the gas lights the burners then the big blower comes on and the gas goes out! it runs several times and after about 5...

Day and night furnace problems? [ 0 Answers ]

I have a D&N Model 394JAZ. Heat operates good. Problem is after the heat cycle is complete and blower shuts off, the system wants to kick the blower back on twice. I have already previously replaced the Pilot Burner, the Main Gas Valve and the Ignition/Lockout Control Board. The guy at the parts...

Day and night furnace [ 1 Answers ]

It keeps running even after it reaches the desired temp

Day and night furnace [ 1 Answers ]

I have a day and night furnace. When turned on at certain temp, it will light up and Shut. Tries to light up but no avail. Pilot will come on but seems there is no gas. Makes noise.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.