 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low pressure from sprinkler
Near the end of last summer my sprinkler system stopped working. It began by water coming out of the back flow preventer when the sprinkler was scheduled to turn on. It worked fine months and days before. I replaced the pop and bobet but same problem. I shut the system down for the winter. Last week I turned it on and same problem. I did find a solenoid that was cracked and leaking water. I replaced but same problem I do notice that when I turn a zone water just bubbles out and I have no pressure at any of the sinks in the house.
|
||||
Check out some similar questions!
The house has a pressure regulator installed, Do I need to install a pressure regulator for sprinkler system? Thank you.
Low water pressure copper pipe low at all fixtures and faucets. City has checked pressure. They installed new shutoff in streetalso. They checked meter and was OK. I am orignal owner feed from street is 3/4".copper house also. House built in 1972. Problem started 6 months ago. I am at whits...
I have a james Hardie sprinkler system that doesn't have much water pressure. It seems to be going to each station like it should, but there isn't hardly any pressure and it just trickles out of the top of a few of them at each station. Is there a leak in my main line or what? :(
I have a hardie sprinkler system that runs off the city water supply. There is very little pressure to no pressure out of the sprinkler heads. It seems to be routing to each station like it should, but there is pretty much no pressure to push the heads up. I'm not sure what the problem could be.
We recently had a sprinkler system installed. We have a well. According to the sprinkler guy, our lack of pressure is not his problem. Is there a way to boost the pressure in the system?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
