Ask Experts Questions for FREE Help !
Ask
    queenest's Avatar
    queenest Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2014, 09:18 PM
    I have well water and there is no water in the house what should I do
    It is about the well that I have one minute I have water and now I don't
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Apr 7, 2014, 04:50 AM
    More details please! Surface or submirable? Deep or shallow well? Is the pump running but no water? Is this the first time you've had trouble? Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the Max water pressure setting for a house water surge tank? [ 1 Answers ]

What is the Max water pressure setting for a house water surge tank? My whole house water pressure seems too low.

Low hot water pressure through the whole house even ater replacing water heater [ 2 Answers ]

I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.

Lots of cold water in the house but no water going to water heater. [ 0 Answers ]

I've tried opening and closing the valves leadind to the water heater but nothing happened, no water into the heater and nothing out of the drain. I have also heard of some sort of electrode that can be attached to pipes for possible defrosting, but I can't seem to locate any in Albuquerque.

Whole house cold water pressure drop off,public water pvc pipes [ 2 Answers ]

Hi! I searched the forums and didn't find my exact problem. So at every faucet in the house, the cold water drops off after initial turn on. House is on the public water main and was plumbed with PVC pipe. Just turned 5 yrs old I am guessing I have some kind of obstruction? There is a main...

Very low water pressue to house after replacing leaking valve on water heater [ 1 Answers ]

I replaced the leaking valve leading to the hot water heater, drained the hot water heater, turned the main valve to the house back on and now have very low water pressure to the house (cold and hot) The house has galvanized metal pipes... HELP please!:confused:

View more questions Search