Ask Experts Questions for FREE Help !
Ask
    shelbymom's Avatar
    shelbymom Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 31, 2014, 06:37 AM
    Laundry sink connection
    My laundry sink and washer are connected to the same water line by a y-connection and I want to be able to turn off the washer water to increase the pressure of the laundry sink water. Or should I shorten the water lines to the laundry sink to increase the pressure.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Mar 31, 2014, 06:41 AM
    None of those are going to increase pressure. THe washer isn't affecting pressure when its not intaking water (filling itself up)... and you don't want to be turning off water to it when it is.

    DO you have pressure issues at any other points in the house? If the answer is no... start looking for valves that aren't all the way open.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Mar 31, 2014, 07:32 AM
    If filling the washer cuts down on filling the this is not a pressure issue but a volume problem. This is a common complaint with older houses with galvanized piping. Over the years rust builds up in the pipe walls,(see image) cutting off the volume of water. You will have pressure until you start to run out of volume.
    There is no easy fix to this. I had the same issue in my 60 year home.
    There's only one solution and that is to have your house repiped in plastic.
    Sorry I couldn't give you better news but all of us with older homes are faced with this problem somewhere down the line. Good luck, Tom
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Laundry sink overflowing [ 3 Answers ]

Whenever I do a load of laundry, the water dumps into my utility sink and eventually overflows. I dump bleach down there and plaung it and it eventually goes down after causing quite the mess. Any idea what the problem is and how it can be fixed?

How to install a laundry sink [ 1 Answers ]

I am moving my loundry from one place to other in my basemant how to install plumbing y how to the make a hole in the concrete for waterhow to install bentilation gas and all a need to finich my job

Laundry Sink Overflows when using kitchen sink [ 5 Answers ]

Our Laundry Sink Overflows when using the kitchen sink.. with really nasty stuff flowing back out. As a result, sometimes when we're doing the laundry the water drains out very slowly, and we can never do the dishes and laundry at the same time. I'm worried that this may eventually become a...

Kitchen Sink/Laundry Sink Drain Vent Non-exist [ 3 Answers ]

The set-up from kitchen sink leading down to drain to basement: 1. Kitchen sink - (R side) - connected to a P drain I think you call it -PVC-, connected to a "metal" T, which has a Studer vent gizmo attached to the top of it, then draining into a metal pipe straight down to the drain in the...


View more questions Search