Ask Experts Questions for FREE Help !
Ask
    hciesiel's Avatar
    hciesiel Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 24, 2014, 03:00 PM
    Kenmore Ultra Wash Quiet Guard 4
    It is blinking clean and won't let me start a new load it just continues to blink clean when it's not

Check out some similar questions!

Kenmore ultra wash quiet guard [ 1 Answers ]

Dishwasher was turned off before cycle completed and now will not start again, the clean light keeps flashing but can get nothing else except the drain cycle to work. Is there a solution to get this dishwasher going again.

How to clean a Kenmore Ultra Wash Quiet Guard [ 2 Answers ]

We have a two year old dishwasher that stops working at the drain cycle. First the 4 and 6 hour delay lights go on, then they go out, the dishwasher shuts down and the red light above Normal Wash blinks rapidly. I suspect that, because this occurs at the drain cycle, that the machine needs to be...

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore ultra wash quiet guard 3 [ 2 Answers ]

The normal wash light keeps blinking and I can't get it to stop.

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.