Ask Experts Questions for FREE Help !
Ask
    beachsand1957's Avatar
    beachsand1957 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 23, 2014, 03:21 PM
    Furnace
    How do I hook up a vent pipe on a Heil furnace model NULK075AG02
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Mar 23, 2014, 05:14 PM
    That is a condensing furnace. You will use 2 PVC pipes, one for intake and 1 for exhaust. Think they are 2".
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? [ 0 Answers ]

How to wire my greentek hrv to kicks on the furnace fan on low of a heil furnace? I had a airconditioner installed in August and for some reason they unhook my hrv so now the hrv turns on but doesn't request the furnace fan to come on. So now it's not circulating the air in my house properly. I...

XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts [ 2 Answers ]

Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas? Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked...

Tran furnace / air main blower on furnace will not run. But the a/c unit runs [ 0 Answers ]

Main blower on furnace, is not running, when thermostat calls for cooling the out side unit runs. The main blower on the furnace in not

Furnace burners ignite but won't stay lit on my trane xe78 furnace? [ 0 Answers ]

I have a Trane XE78 furnace and the flames come on for about 5-10 seconds and then shut off. They re-ignite about 10 seconds later, then shut off 5-10 seconds after the 2nd ignition. I believe they flame on one more time, shut off and then never re-ignite and the blower just runs and runs with...

View more questions Search