Ask Experts Questions for FREE Help !
Ask
    Leon Urban's Avatar
    Leon Urban Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 23, 2014, 08:34 AM
    Use a 4 port valve for shower only installation?
    Can I use a 4-port valve for a shower only installation?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Mar 23, 2014, 11:45 AM
    Hi Leon

    If you are asking if you can use a 4 port tub and shower valve for a shower only installation then the answer is YES, you can...just have to plug off the tub end. on the bottom of the valve...;)

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bathtub/shower valve installation question [ 1 Answers ]

I am installing a 60" bathtub WITHOUTa shower. Can I use a standard single handle tub/shower valve and cap off the outlet on the valve that would feed the shower. I can't seem to find a tub only style. In fact its very hard to find a wall mount tub spout with 3 handles also. Thanks any...

Mixet shower valve installation [ 7 Answers ]

Hello, I replaced the mixet 4 1/2" stem valve ,Its not wanting to work properly and in the instructions it says the "red dot" goes "up".. The replacement kit I got from home depot didn't have a red dot to be found or a small chennel in the brass. Any ideas on how to go about making sure the stem is...

Installation of moen shower diverter valve [ 3 Answers ]

Removed moen shower diverter valve because it was frozen. Purchased new valve from manufacturer. Un able to install new diverter, will not thread in receiver. Threads do not appear to be damaged. What would you suggest?

Moen tub/shower valve installation [ 3 Answers ]

We just had a contractor install a Moen valve in our bathroom remodel. It is a M-Pact common valve system and the model number is T2449pm. When I fill the bathtub with the bathtub spout water is dripping from the shower head. What are the possible reasons for this. I had one plumber come out...

3 valve shower diverter installation [ 1 Answers ]

I recently purchased and installed a new diverter for my 3 valve shower setup. However, when I turn the diverter to shower I get very little water pressure to the shower head and no water coming from the faucet. Is there any trick to properly installing the new diverter to allow for full water flow...

View more questions Search