Ask Experts Questions for FREE Help !
Ask
    partsdog's Avatar
    partsdog Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 19, 2014, 07:44 AM
    Sewer efluant pump
    Pump will run on hand but not on auto? System 2 years old, how to check float switch in control box?do these circuit boards go bad?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Mar 19, 2014, 12:34 PM
    I would check out the float switch before I looked at the circuit board. Let me know what you find. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Injector sewer pump [ 1 Answers ]

I recently had major repairs done after a severe storm. The contractor dumped drywall compound and paint down the kitchen sink and used a whole box of Kleenex in the toilet. It wasn't just a final rinse of the tools and brushes but chunks of drywall compound, etc... We have a septic system with...

Sewer ejector pump [ 2 Answers ]

occasionally, the pump will stop working & flood the basement. It has happened 4x's, it blows the fuse box, I've reset the button on the pump, however it keeps happening. Do I need a new motor?

Sewer ejection pump for a sump pump? [ 7 Answers ]

My sump pump for sewage had water pumps installed instead of sewer ejection pumps... is that OK?

Sewer Pump [ 5 Answers ]

We are trying to convert an existing large storage closet into a bathroom. It is on the other side of the house from the main sewer line. The plumber has suggested installing a "pump" that will "condense" the sewage into a smaller, 2 inch drain line that collects the kitchen drainage. The other...

Sewer enjector pump [ 4 Answers ]

I use to hear this pump going on, however I have not heard this in a while. It makes me a little nervous. How do I know if it is working or not? I would hate to end up with a mess or call a repair company for no reason. Can anyone tell me how I can tell if it is working? Thanks Mary


View more questions Search