5/8 in. pex vs. 1/2 in. pex installed in cement heated floor

Check out some similar questions!

Should you use 1/2 inch or 5/8 inch pex in concrete radiant floor boiler systems [ 0 Answers ]

Shouid you 1/2 in or 5/8 inch pex in concrete radiant floor heat. The shop is 80ft by 88ft What would be the advantage over the other one

Pex [ 1 Answers ]

I want to re-plumb my house using a manabloc system and I want to use 3/8 supply lines for most of my fixtures. The stub outs that I can use are 3/8 pex to 1/2 copper. So with that said and without me tearing into walls am I able to just use the copper pipe adapters within 2-3 of the fixture to...

Regular Pex with wirsbo pex pipe [ 1 Answers ]

Can someone please let me know if you have to use Wirsbo fittings with Uponor pex a tubing? Thanks Joe

1/2'' copper down to PEX - which size PEX is best? [ 1 Answers ]

We're finishing our basement and I want to re-run the kitchen supply line because the 1/2'' copper runs underneath (perpendicular) to the 16'' on center joists and thus lowers the ceiling by a full inch (it will need to be shimmed). I want to install PEX that runs through the center of the joists...

Stubbing Pex out through finished floor [ 1 Answers ]

so replumbing in pex and need help with connecting to fixtures. I need to go straight through the floor to replace existing pipes so my question is how to do this. Home is on post and pier so big crawl space to work in. should I just use a drop ear and secure it to an added 2x4 in between the...

View more questions Search

Check out some similar questions!

Add your answer here.