 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trouble with door unit and chime
I am replacing a 3 wire nm100 system with a nwh300c system. Everything is working great except the door unit and chime. I have wired the black and red wires to the "door" connections and plugged the chime in where it says chime but nothing at the door works. Do I need to hook up the green wire from the door somewhere. I know the door speaker works because I wired it to a room speaker and it played music.
|
||||
Check out some similar questions!
My nutone door unit chimes, but it has problem to behave as an intercom. It worked briefly when I first replaced it with a new one, then I could not to communicate with the unit inside the house.
Hi, I was given an old Nutone 4 Chime that has stopped working - just a low hum and slight movement of the coils. There is NO model number on the chime, only the Nutone name. Does anyone have any information on this chime? Looking for a wiring diagram and or parts list. This model has a...
I bought a home recently and it came with LA174WH Door bell chime. The chime cover was open and when I tried to connect the nodes to the cover, it started making continuous beep. No one was using the push button at that time. Without the cover, when I press the push button, I don't hear any thing....
Wanted to change my door chime with chime from former home. Purchased a larger transformer as directed. The tranformer has 3 connector screws. Hooked one to transformer screw and the other to the front door bell screw. Connected the white wires all together with a twist cover. The followed...
Why would the motor keep humming when you push the button?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
