Ask Experts Questions for FREE Help !
Ask
    tyland's Avatar
    tyland Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2014, 08:03 PM
    Need hlepwith my carrie furnace
    My Carrier furnace model 58sta090-14 series 100 blower motor runs all the time an the furnace will not cycle up so I check the limit switch it's okay, the pressure switch is okay, the roll-out switches are okay and the thermostat check find so I wonderif it could be the control board an if so how do I check it to find -out if it's bad.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Mar 16, 2014, 08:40 PM
    Turn off the power to the heater for a couple of minutes and restart. Should show a blink code on control panel if it faults.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GMH8 goodman furnace won't stay lit. The furnace lights for about 2 seconds [ 2 Answers ]

I have a Goodman Furnace GMH8 that is 4 years old and has been working fine but today it will not stay lit. The furnace lights for about 2 seconds and then goes out. The blower comes on and will continue to run as the furnace lights and then goes out several times before shutting off.

Location of the Limit Switch on a carrie 48GS-048115301 [ 0 Answers ]

I have an led indication a limit switch failure. Fan blows but not heat. Fan won't stop without removing power to unit. The schematic on door is washed out, so not very useful.

View more questions Search