Ask Experts Questions for FREE Help !
Ask
    SAFJackson's Avatar
    SAFJackson Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 13, 2014, 10:57 AM
    Filling geyser
    I have just had a Kwikot 150L geyser installed. When I turn on the tap, it runs for a while and then stops. How do I make sure the geyser is full of water?

Check out some similar questions!

My washer keeps filling and then overflows because filling will not stop in the cycle [ 7 Answers ]

The washer then overflows because filling will not stop unless the cycle is advanced in the dial. Is it a problem with the solenoid or the timer? I have stopped using one cycle for automatically timed and went to another way to wash in a different cycle; but now both overflow unless I turn the...

Airlock in geyser [ 1 Answers ]

Hi All My resevior ran dry and all the water in my geysers went too. I have since filled it up and made sure that water was in the geysers. Problem is, the water is trickling out slowly, it is getting hot. No pressure at all. Do I leave my geysers off?? I also have a solar panel heating...

Geyser overflow [ 1 Answers ]

Geyser overflows at night through overflow pipe

Geyser [ 1 Answers ]

If geyser is dripping do I switch it off an clóse the tap

Geyser problems [ 4 Answers ]

The problem started when the hot water supply remained cold suggesting one of two solutions, either the thermostat or element packed up. I had the existing thermostat tested and because it was faulty replaced same. The water heated up but after a considerable wait. This was okay for two days until...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.